Plug In Integral Probe (PINIP™) Non-Ferrous Substrate Probe | Scale 2 | Elcometer 456

Elcometer 456 Plug In Integral Probe (PINIP™) Non-Ferrous Substrate Probe - Scale 2

Manufacturer: Elcometer

Part #: T456CN2P

Description: Unlock superior performance with this amazing probe! It's a must - have for your coating measurement needs.

• • Works with Non - Ferrous or Dual FNF Elcometer 456 Separate Gauges: Enjoy seamless compatibility.
• • High Resolution & Accuracy: Switch to Scale 1 mode for thin coatings and get precise results.
• • Integral Probe Performance: Attach to a separate gauge and experience the benefits of an integral probe.

Specifications:

• Range: 0 - 200 mils (0 - 5mm)
• Accuracy: ±1 - 3% or ±1.0 mil (±20µm)
• Resolution: 0.1 mil: 0 - 50 mils; 1mil: 50 - 200 mils (1µm: 0 - 1mm; 10µm: 1 - 5mm)
• Minimum convex surface radius - 100mm (3.97')
• Minimum concave surface radius - 150mm (5.90')
• Minimum headroom - 185mm (7.28')
• Minimum sample diameter: - 14mm (0.55')

Data Sheet

This Elcometer 456 probe is perfect for anyone who needs to measure coatings on non - ferrous substrates. Whether you're a professional in the manufacturing industry or a DIY enthusiast, this probe can help you get accurate coating measurements. You can use it in a variety of settings, like factories or workshops. The probe has a measurement range from 0 to 200 mils (0 to 5mm), and it needs a minimum convex surface radius of 100mm, a minimum concave surface radius of 150mm, and a minimum headroom of 185mm. It also requires a minimum sample diameter of 14mm. With its high - resolution and accuracy features, it's a reliable tool for your coating measurement tasks.